 |
| How to fix uplifted or bulging ceramics |
Here's how to fix a bulging ceramic that can cause cracked or broken ceramics and the importance of distance and rubber or polymer.
Perhaps you have also experienced floor tiles that are bulging or cracked and broken. The tile floor is no longer beautiful and the ceramic looks prominent so that it is dangerous for the person who passes by.
Raised ceramics is a problem that often arise on the floor that uses ceramic material and then released if not immediately repaired of course be a danger because it can make people who pass it falling down. It often happens before it could be separated from the ceramic arrangement has been broken and the fractional forms also cause its own problems if not quickly handled.
Another problem that arises is becoming increasingly uncomfortable was when it had to be replaced, it kind of ceramic that is sought is not there or run out so must wear a type of ceramic else it makes the display floor become mismatched and the value of its beauty to be reduced even disappear altogether this condition which makes residents feel less comfortable. Because the eyes of the owner of the house is always fixed on the spot evens without realizing it is a psychological influence
Cases such as the ceramics were lifted above there are various causes for example there are compilers of cells in the dough cement and sand or mortar this is happening because of evaporation of water too fast when mounted ceramic cavity as a result emerged that make ceramics easily lifted and separated when it is dry.
Another thing that can happens is the vibrations that occur on the surface of the ground can also make ceramics easily raised this event is more common in buildings or building houses located on the edge of the highway is often traversed by large vehicles or near the factory using a production machine with the size which causes a very high vibration in the surrounding soil.
Similarly, changes in temperature that can makes mortar cement not able to adjust quickly if too hot can makes expansion but if it is very cold can experience shrinkage this often occurs in open spaces that often hit the sun directly, especially at noon or in almost daily use of refrigerators or air conditioners with very low temperature temperatures.
The occurrence of an earthquake that makes the position of the land to be shifted or according to the construction and building changes also can be a major cause of ceramics that rise to the above types of construction changes such as cracked concrete and the position or structure decreased significantly
Then how and best to avoid and repair raised ceramics? There are several methods that can be done first when mounted should be spaced between the walls or about two mm to have space left for ceramics if of shrinkage and expansion.
The second way can be to use a pad of foam or polymer mounted in the gap between the wall and the ceramic foam and can be a sustaining tool when the floor condition is enlarged due to expansion.
Another way is to make a good quality mortar between sand and cement should be mixed evenly and the oil is even better if using a mortar that claims as to install the tile floor because it contains materials that can raise the level of adhesion power.
If the ceramic has been lifted but not released yet better removed alone and then re-installed it is better if the ceramic already removed because it can be broken and cannot be used again but when it is released and broken with new replaced.
Then the technique to repair and reinstall the sand cement dough at the bottom should be dug or lifted and then made a new deeper dough. After that the ceramic is installed with the same process when first installing the ceramic.
